Quick Troubleshooting Guide for SolarEdge Inverters in Miami

Here’s a quick look at some of the common problems you might face with your SolarEdge inverter, along with potential solutions. If you encounter any of these issues, and feel it’s beyond your scope, GC Solar & Electric is always available to provide Solar Edge Solar Repair services.

1. Inverter Not Communicating with the Monitoring Platform

A common issue with SolarEdge inverters is a failure to communicate with the monitoring platform. This may occur due to Wi-Fi issues or problems with the connection to the local network.

How to Fix It:

• First, check your Wi-Fi connection to ensure it’s working.
• Reset the inverter’s communication by powering it off and then back on.
• If the problem persists, it could be an internal issue requiring solar service from a professional like GC Solar & Electric.

2. Error Codes on the Inverter Display

SolarEdge inverters often display error codes to indicate specific issues. Some of the most common codes include:

• Error 18: DC Over Voltage
• Error 25: AC Over Voltage
• Error 27: Isolation Fault

How to Fix It:

• For Error 18 and Error 25, make sure the inverter is properly grounded and check the wiring. Sometimes, this may require professional intervention.

• For Error 27, inspect your cables for damage or signs of wear. If unsure, contact GC Solar & Electric for their solar panels repair near me service in Miami to conduct a detailed inspection.

3. Low Energy Output

If your system isn’t producing as much energy as expected, it may not necessarily be an inverter issue, but it’s worth investigating.

How to Fix It:

• Check the panels to ensure they are clean and free from debris or shade that could affect performance.

• Make sure your inverter is operating at the right voltage. You may need Solar Edge Solar Repair to evaluate whether there’s a deeper issue with the inverter or another part of the system.

• It’s also important to regularly schedule maintenance for your Solar Panel Installation, especially if it’s a Commercial solar installation, to ensure optimal efficiency.

4. Inverter Power Off During Peak Sunlight

If your SolarEdge inverter turns off during peak sunlight hours, this could indicate an overvoltage problem or an internal hardware issue.

How to Fix It:

• Check the AC voltage output. If it’s too high, this could cause the inverter to shut down for safety reasons.

• If the problem persists, this is a situation that calls for professional help. Reach out to GC Solar & Electric for expert solar service in Miami to ensure your system is functioning properly.

5. Inverter Continually Restarting

In some cases, the inverter may continuously reboot, which can interrupt energy production and indicate a problem with the power grid or the inverter itself.

How to Fix It:

• First, confirm that your local grid is stable. If the voltage levels are fluctuating, this could be the reason behind the constant restarts.

• If there’s no issue with the grid, contact GC Solar & Electric for a full inspection and solar panels repair near me service to troubleshoot further.